1.[ Steel 36CrNiMo4 1.6511 Gr.9840 SCNM439 Plate& Coil& Sheet]
Introduction:
Standard: |
EN 10277-5: 2008 Bright steel products. Technical delivery conditions. Steels for quenching and tempering |
EN 10083-3: 2006 Steels for quenching and tempering. Technical delivery conditions for alloy steels |
EN 10269: 1999 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
EN 10263-4: 2001 Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for steels for quenching and tempering |
EN 10250-3: 2000 Open steel die forgings for general engineering purposes. Alloy special steels |
|
Equivalent grades of steel 34CrNiMo6 (1.6582)
Warning! Only for reference
EU
EN |
USA
- |
Germany
DIN,WNr |
Japan
JIS |
France
AFNOR |
England
BS |
Italy
UNI |
China
GB |
Sweden
SS |
Poland
PN |
Czechia
CSN |
Russia
GOST |
Inter
ISO |
34CrNiMo6 |
|
|
|
|
|
|
34CrNi3Mo |
34CrNiMo |
ZG34CrNiMo |
|
|
|
|
36KH2N2MFA |
38KH2N2MA |
40KHN2MA |
|
36CrNiMo6Equivalent grades of steel 34CrNiMo6 (1.6582)
Warning! Only for reference
EU
EN |
USA
- |
Germany
DIN,WNr |
Japan
JIS |
France
AFNOR |
England
BS |
Italy
UNI |
China
GB |
Sweden
SS |
Poland
PN |
Czechia
CSN |
Russia
GOST |
Inter
ISO |
34CrNiMo6 |
|
|
|
|
|
|
34CrNi3Mo |
34CrNiMo |
ZG34CrNiMo |
|
|
|
|
36KH2N2MFA |
38KH2N2MA |
40KHN2MA |
|
|
|
|
2.[Steel 36CrNiMo4 1.6511 Gr.9840 SCNM439 Plate& Coil& Sheet]
Surface:
mill finish (not polished)
brushed
mirror
embossed
oxidized
cold-rolled
hot-rolled
3.[Steel 36CrNiMo4 1.6511 Gr.9840 SCNM439 Plate& Coil& Sheet]
Chemistry:
Chemical composition % of steel 34CrNiMo6 (1.6582): EN 10277-5-2008
C |
Si |
Mn |
Ni |
P |
S |
Cr |
Mo |
0.3 - 0.38 |
max 0.4 |
0.5 - 0.8 |
1.3 - 1.7 |
max 0.025 |
max 0.035 |
1.3 - 1.7 |
0.15 - 0.3 |
Information for steel and alloy suppliers
Contact |
Buying Requirements, Buying Leads
of steel 34CrNiMo6 (1.6582) |
Time |
Country: India
More info |
Quantity: After SAMPLE APPROVAL
Shape: Rod/Bar/Rebar |
2020-02-02 |
Mechanical properties of steel 34CrNiMo6 (1.6582)
Nominal diameter (mm): |
to 16 |
16 - 40 |
40 - 100 |
100 - 160 |
160 - 250 |
Rm - Tensile strength (MPa) (+QT) |
1200-1400 |
1100-1300 |
1000-1200 |
900-1100 |
800-950 |
Rm - Tensile strength (MPa) (+AC) |
720 |
Nominal diameter(mm): or for flat products thickness: to 8; 8-20; 20-60; 60-100; 100-160; |
to 16 |
16 - 40 |
40 - 100 |
100 - 160 |
160 - 250 |
Re - Upper yield strength or Rp0.2 - 0.2% proof strength (MPa) (+QT) |
1000 |
900 |
800 |
700 |
600 |
Nominal thickness(mm): |
to 160 |
160 - 330 |
330 - 660 |
Re - Upper yield strength (MPa) (+QT) |
600 |
540 |
490 |
KV - Impact energy (J) longitud., (+QT) |
+20°
45 |
-40°
40 |
A - Min. elongation at fracture (%) transverse, (+QT) |
9-14 |
Nominal thickness (mm): |
to 16 |
16 - 40 |
40 - 100 |
100 - 160 |
160 - 250 |
A - Min. elongation Lo = 5,65 √ So (%) (+QT), round products |
9 |
10 |
11 |
12 |
13 |
Nominal diameter (mm): or for flat products thickness: to 8; 8-20; 20-60; 60-100; 100-160; |
to 16 |
16 - 40 |
40 - 100 |
100 - 160 |
160 - 250 |
Z - Reduction in cross section on fracture (%) (+QT) |
40 |
45 |
50 |
55 |
55 |
Z - Reduction in cross section on fracture (%) (+AC) |
58 |
Brinell hardness (HBW): (+A) |
248 - 255 |
6.These are our warehouses :
7.These are packaging pictures :