[aluminium alloy A96065/AlMg1Bi1Si ]
Introduction:
Standard:
EN 573-3: 2009 Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products
EN 755-2: 2008 Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Mechanical properties
EN 754-2: 2008 Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Mechanical propertie
|
| Rm - Tensile strength (MPa) (T6) |
260 |
|
| Rp0.2 0.2% proof strength (MPa) (T6) |
240 |
|
| A - Min. elongation at fracture (%) (T6) |
10 |
|
| A - Min. elongation Lo = 50mm (%) (T6) |
8 |
[aluminium alloy A96065/AlMg1Bi1Si]
Application:
[aluminium alloy A96065/AlMg1Bi1Si]
Chemistry:
Chemical composition % of grade ENAW-AlMg1Bi1Si ( ENAW-6065 )
| Fe |
Si |
Mn |
Cr |
Ti |
Cu |
Zr |
Pb |
Mg |
Zn |
Bi |
Others |
- |
| max 0.7 |
0.4 - 0.8 |
max 0.15 |
max 0.15 |
max 0.1 |
0.15 - 0.4 |
max 0.15 |
max 0.05 |
0.8 - 1.2 |
max 0.25 |
0.5 - 1.5 |
each 0.05; total 0.15 |
Al - remainder |
[aluminium alloy A96065/AlMg1Bi1Si ]
Surface
mill finish , not polished,
brushed
mirror
embossed
oxidized
cold-rolled
hot-rolled
[aluminium alloy A96065/AlMg1Bi1Si ]
Specification:
Shape/Form : sheet,plate,bar,rod,tube,pipe,strip,foil and so on
Surface : Mill Finish(Not Polished ) ,polished ,colour-coated, sand blasting , brushed,mirror ,embossed ,oxidized,anodic oxidation cold-rolled,hot-rolled
This is our warehouse :
This is packaging :
Audited Supplier 
){kind=link}