Aluminum 2L95 and Aluminum Alloy 2L95 Sheet or Plate

• Color: Silver
• Application: Transportation Tools, Door & Window, Glass Wall, Heat Sink, Decorations
• Certification: RoHS, ISO9001, ASTM, JIS, GB, EN, ASTMB
• Technique: Extruded
• Grade: 7000 Series
• Temper: T351 - T651
• Model NO.: A97075 /AlZn5.5MgCu/3.4365/ 2L95
• Surface Treatment: Mill Finish
• Alloy: Alloy
• Form/Shape: Sheet,Plate,Bar,Rod,Tube,Pipe,Strip,Foil an
• Application-1: Is Mainly Used in Structural Forgings, Especially
• Payment: T/T 30% Prepayment, 70% Balance Before Delivery
• Melting Point: 600-650
• Density: 2.7-2.8g/Cm
• Transport Package: Standard Export Packaging
• Specification: 0.5-200mm*500-2500mm*500-100000mm
• Trademark: Taixie
• Origin: China
• HS Code: 7606910000
• Production Capacity: 10 Tons Per Month

Product Description

1.[aluminium  alloy A97075 /AlZn5.5MgCu/3.4365/ 2L95] 
Introduction:

7075 aluminum is a 7000-series aluminum alloy: the main alloying addition is zinc and it is formulated for primary forming into wrought products. 7075 is the Aluminum Association (AA) designation for this material. In European standards, it will be given as EN AW-7075. 2L95 is the British Standard (BS) designation. A97075 is the UNS number. Additionally, the EN chemical designation is AlZn5,5MgCu. And the AFNOR (French) designation is A-Z5GU.

It has been in use since 1943, but has only received its standard designation in 1954. This material is well established: the Further Reading section below cites a number of published standards, and that list is not necessarily exhaustive.

It can have the lowest ductility among the 7000-series alloys in the database.

The properties of 7075 aluminum include 17 common variations. This page shows summary ranges across all of them. For more specific values, follow the links immediately below. The graph bars on the material properties cards further below compare 7075 aluminum to: 7000-series alloys (top), all aluminum alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.

7075-O Aluminum7075-T6 Aluminum
7075-T62 Aluminum7075-T651 Aluminum
7075-T6510 Aluminum7075-T6511 Aluminum
7075-T652 Aluminum7075-T7 Aluminum
7075-T73 Aluminum7075-T7351 Aluminum
7075-T73510 Aluminum7075-T73511 Aluminum
7075-T7352 Aluminum7075-T76 Aluminum
7075-T7651 Aluminum7075-T76510 Aluminum
7075-T76511 Aluminum

 

Standard:

EN 573-3: 2009 Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products EN 755-2: 2008 Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Mechanical properties EN 485-2: 2008 Aluminium and aluminium alloys. Sheet, strip and plate. Mechanical properties EN 754-2: 2008 Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Mechanical properties EN 1592-2: 1998 Aluminium and aluminium alloys. HF seam welded tubes. Mechanical properties EN 603-2: 1997 Aluminium and aluminium alloys. Wrought forging stock. Mechanical properties EN 1301-2: 1997 Aluminium and aluminium alloys. Drawn wire. Mechanical properties EN 941: 1996 Aluminium and aluminium alloys. Circle and circle stock for general applications. Specifications EN 12392: 2000 Aluminium and aluminium alloys. Wrought products. Special requirements for products intended for the production of pressure equipment EN 1715-3: 2008 Aluminium and aluminium alloys. Drawing stock. Specific requirements for mechanical uses (excluding welding)

2.[aluminium  alloy A97075 /AlZn5.5MgCu/3.4365/ 2L95]
 Application:




3.[aluminium  alloy A97075 /AlZn5.5MgCu/3.4365/ 2L95] 
Chemistry:

Chemical composition %   of grade   ENAW-AlZn5.5MgCu   ( ENAW-7075 )

Zr +Ti < 0.25 may be used for extruded and forged products

Fe	Si	Mn	Cr	Ti	Cu	Mg	Zn	Others	-
max   0.5	max   0.4	max   0.3	0.18 - 0.28	max   0.2	1.2 - 2	2.1 - 2.9	5.1 - 6.1	each 0.05; total 0.15	Al - remainder

New opportunities for buyers!
Post free buying requirement for   ENAW-AlZn5.5MgCu



Mechanical properties of grade   ENAW-AlZn5.5MgCu   ( ENAW-7075 )

Rm - Tensile strength (MPa) (O) (H111)	275

Rm - Tensile strength (MPa) (T6)	470-560

 

Rp0.2 0.2% proof strength (MPa) (O) (H111)	165

Rp0.2 0.2% proof strength (MPa) (T6)	400-505

 

A - Min. elongation at fracture (%) (O) (H111)	10

A - Min. elongation at fracture (%) (T6)	5-8

 

A - Min. elongation Lo = 50mm (%) (O) (H111)	8

A - Min. elongation Lo = 50mm (%) (T6)	4-6

 

Brinell hardness   (HBW):   (O) (H111)	60
Brinell hardness   (HBW):   (T6)	150

Properties ENAW-AlZn5.5MgCu

Intended to be contact with food - no;
Maximum working temperature Tmax = 160 °C

Equivalent grades of grade   ENAW-AlZn5.5MgCu   ( ENAW-7075 )
Warning! Only for reference

EU EN	USA -	Germany DIN,WNr	Japan JIS	France AFNOR	England BS	Italy UNI	Poland PN	Czechia CSN	Austria ONORM	Russia GOST	Inter ISO
ENAW-AlZn5.5MgCu	A97075	3.4365 AlZnMgCu1.5	7075	7075 A-Z5GU	7075 L95 L96	P-AlZn5.8MgCuCr	AlZn6Mg2Cu	424222	AlZnMgCu1.5	V95	AlZn6MgCu

4.[aluminium  alloy A97075 /AlZn5.5MgCu/3.4365/ 2L95] 

Surface :

mill finish ,  not polished,
brushed
mirror 
embossed 
oxidized
cold-rolled
hot-rolled

5.[aluminium  alloy A97075 /AlZn5.5MgCu/3.4365/ 2L95] 
Specification:

Shape/Form : sheet,plate,bar,rod,tube,pipe,strip,foil and so on 

Surface : Mill Finish(Not Polished ) ,polished  ,colour-coated, sand blasting  , brushed,mirror ,embossed ,oxidized,anodic oxidation    cold-rolled,hot-rolled  


6.These are our  warehouse  pictures:













7.These  are packaging  pictures :