16MnCr5 is a steel introduced from Germany, equivalent to China's 16CrMnH steel (refer to GB/T 5216-2004), has a better hardenability and machinability, for larger cross-section parts, heat treatment can be higher surface hardness and abrasion resistance, low-temperature impact toughness is also higher. 16MnCr5 gear steel by carburising and quenching is used, mainly used in the manufacture of gears, worms, seals Bushings and other parts.
16MnCr5 Gear Steel
Execution standard: EN 10084-1998
European Standard: 1.7131
German Standard: 16MnCr5
16MnCr5 properties and scope of application:
16MnCr5 chemical composition
Carbon C :0.14~0.19
Silicon Si: ≤0.40
Manganese Mn :1.00~1.30
Sulfur S :≤0.015
Phosphorus P :≤0.015
Chromium Cr:0.80~1.10
16MnCr5 mechanical properties
16MnCr5 tensile strength σb (MPa): 880-1180
16MnCr5 Conditional Yield Strength σ0.2 (MPa): 1187
16MnCr5 elongation δ5 (%): 9
16MnCr5 section shrinkage ψ (%): 57
16MnCr5 impact toughness value αku (J/cm2): 34
16MnCr5 hardness: ≤ 297HB
Specimen size: a test material
16MnCr5 heat treatment specifications and metallographic organisation:
Heat treatment specifications: 900 ºC oil quenching + 870 ºC oil quenching, 200 ºC tempering.
Metallographic organisation: tempered martensite.
Uses: Manufacture of gears, worm gears, plastic moulds, turbine oil seals and petrol bushings, etc.
Our Promise
1. How much per kilogram?
2 USD per kilogram.
2. What is the minimum order quantity?
From one kilogram.
3. How many mm long is the typical material?
Usually 6000mm long.
4. Can I have it cut for free?
Yes, we have cutting equipment.
5. Can I receive payment through vtb bank?
Yes, you can.
6. What if I get a bad material?
We will resend it to you.
7. What is the payment method?
TT/30%/70
8. Can I inspect the goods?
You can inspect the goods in person or appoint a third party to inspect the goods.
9. How long has your company been established?
16 years
10. How can I be sure that the goods I receive are qualified?
Our company has its own spectrometer, each batch of materials will be tested and photographed for the customer to keep a record. 11.
11. What is your delivery time?
7-10 days for stock, 30-45 days for cus
Audited Supplier 
16MnCr5 is a steel introduced from Germany, equivalent to China's 16CrMnH steel (refer to GB/T 5216-2004), has a better hardenability and machinability, for larger cross-section parts, heat treatment can be higher surface hardness and abrasion resistance, low-temperature impact toughness is also higher. 16MnCr5 gear steel by carburising and quenching is used, mainly used in the manufacture of gears, worms, seals Bushings and other parts.
){kind=link}