| Customization: | Available |
|---|---|
| Type: | Bare |
| Conductor Type: | Solid |
|
Still deciding? Get samples of US$ 5/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Package | ||
| Specification | Wire Tray | Weight |
| Φ1.0~1.6mm | D100mm D200mm D270mm D300mm K300mm |
1kg, 5kg, 15kg, 17kg, 18kg, 20kg |
| Wire Chemical Composition (%) | |||||||
| C | Mn | Si | P | S | Cr | Ni | Cu |
| 0.06~0.15 | 1.40~1.85 | 1.80~1.15 | ≤0.025 | ≤0.035 | - | - | ≤0.50 |
| Deposited Metal Mechanical Properties | |||
| Yield Strength σ0.2(Mpa) |
Tensile Strength σb(Mpa) |
Elongation δ5% |
AKV Imapact Energy (J)(-40ºC) |
| ≥420 | ≥500 | ≥22 | ≥90 |
| Diameter of wire(mm) Wleding Current(A) | |||
| Φ1.0 | Φ1.2 | Φ1.4 | Φ1.6 |
| 40~140 | 50~220 | 80~350 | 120~450 |
| Matters needing attention: |
| 1.Wire into the plant must be stored in dry conditions, can not open wire reel waterproof package. 2.Welding shall be removed before welding surface oil, rust,water and other impurities. 3.The CO2 gas protection, CO2gas purity 99.98%. 4.CO2 welding protective gas flow rate should be controlled at 20~25L/min. 5.Wire extension length should be controlled in the range of 15~25mm. 6.Preheatig before welding to weld 150ºC~300ºC, 700ºC~740ºC tempering treatment only after. |
){kind=link}