1. 6070 Aluminium alloy flat/plate Introduction:
6070 aluminum is a 6000-series aluminum alloy: there is significant alloying with both magnesium and silicon, and the alloy is formulated for primary forming into wrought products. 6070 is the Aluminum Association (AA) designation for this material. In European standards, it will be given as EN AW-6070. A96070 is the UNS number.It originally received its standard designation in 1962.
The properties of 6070 aluminum include two common variations. This page shows summary ranges across both of them. For more specific values, follow the links immediately below. The graph bars on the material properties cards further below compare 6070 aluminum to: 6000-series alloys (top), all aluminum alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
2. 6070 Aluminium alloy flat/plate Chemical composition :
Element |
Content (%) |
Aluminium / aluminum, Al |
97 |
Silicon, Si |
1.40 |
Magnesium, Mg |
0.80 |
Manganese, Mn |
0.70 |
Copper, Cu |
0.28 |
3.6070 Aluminium alloy flat/plate Physical Properties
Properties |
Metric |
Imperial |
Density |
2.6-2.8 g/cm3 |
0.0939- 0.101 lb/in3 |
4. 6070 Aluminium alloy flat/plate Mechanical Properties:
Properties |
Metric |
Imperial |
Tensile strength |
145 MPa |
21031 psi |
Yield strength |
69 MPa |
10008 psi |
Shear strength |
97 MPa |
14069 psi |
Fatigue strength |
62 MPa |
8993 psi |
Elastic modulus |
70-80 GPa |
10153-11603 ksi |
Poisson's ratio |
0.33 |
0.33 |
Elongation |
20% |
20% |
Hardness |
35 |
35 |
5.6070 Aluminium alloy flat/plate Thermal Properties:
Properties |
Conditions |
Temp |
Treatment |
Thermal conductivity |
175 W/mK |
25ºC/77ºF |
T6 |
6. 6070 Aluminium alloy flat/plate Applications:
Aluminium / aluminum 6070 alloy is used in manufacturing pipelines and heavy duty welded structures.
7. 6070 Aluminium alloy flat/plate Surface :
Mill finish,brushed,mirror ,embossed ,oxidized,cold-rolled,hot-rolled
8. 6070 Aluminium alloy flat/plate Specification:
Thickness: 0.5-100mm
Width: 500mm-2000mm , regular width is as follows:
500mm,1000mm,220mm,250mm,1500mm, or as required
Length :500-10000mm
1000mm,2000mm,2440mm,3000mm,3048mm,6000mm, or as required
9. 6070 Aluminium alloy flat/plate Picture: